U041B
U041B is a generic OBD-II network diagnostic trouble code: . It is logged by the engine control unit when the network monitor detects that a specific fault threshold has been exceeded — typically resulting in the malfunction-indicator lamp (MIL / check-engine light) being illuminated.
Detailed reference content for U041B is being prepared. What you see above — the code's group, system, and the software disable option below — is accurate and complete; the long-form explainer, common causes, symptoms, and diagnostic steps will appear here once they have been reviewed.
Related network codes
- U0400 — Invalid Data Received
- U0401 — Invalid Data Received From ECM/PCM
- U0402 — Invalid Data Received From Transmission Control Module
- U0403 — Invalid Data Received From Transfer Case Control Module
- U0404 — Invalid Data Received From Gear Shift Control Module
- U0405 — Invalid Data Received From Cruise Control Module
Disabling U041B in software
RaceTune can permanently disable U041B — and any other OBD-II diagnostic trouble code — on every ECU family we support. The monitor is disabled inside the ECU itself, so the fault stops being logged: the warning light stays off and the engine never enters limp mode for this code. The change is tied to your exact software version.
Software modifications affect emissions compliance and are not road-legal in many jurisdictions. RaceTune service files are intended for motorsport, off-road, and export use.
Got U041B in your scan?
Upload your ECU file — we'll identify the exact software version and confirm whether a disable is available for your car.
Upload your file