U0114

Lost Communication With Four-Wheel Drive Clutch Control Module

U0114 is a generic OBD-II network diagnostic trouble code: Lost Communication With Four-Wheel Drive Clutch Control Module. It is logged by the engine control unit when the network monitor detects that a specific fault threshold has been exceeded — typically resulting in the malfunction-indicator lamp (MIL / check-engine light) being illuminated.

Code
U0114
Group
Network
System
Network
Severity
Critical (limp mode / no-start)
Need U0114 disabled?
RaceTune permanently disables any OBD-II trouble code on supported ECUs — for motorsport, off-road, and export use.
→

Detailed reference content for U0114 is being prepared. What you see above — the code's group, system, and the software disable option below — is accurate and complete; the long-form explainer, common causes, symptoms, and diagnostic steps will appear here once they have been reviewed.

Related network codes

Disabling U0114 in software

RaceTune can permanently disable U0114 — and any other OBD-II diagnostic trouble code — on every ECU family we support. The monitor is disabled inside the ECU itself, so the fault stops being logged: the warning light stays off and the engine never enters limp mode for this code. The change is tied to your exact software version.

Permanent
The monitor is disabled in the ECU itself — not just cleared. It cannot return.
Tailored to your file
Each patch is matched to your specific software version — never a one-size-fits-all file.
Reversible
The original file is always preserved. Reflash the stock to return the ECU to factory state.

Software modifications affect emissions compliance and are not road-legal in many jurisdictions. RaceTune service files are intended for motorsport, off-road, and export use.

Got U0114 in your scan?

Upload your ECU file — we'll identify the exact software version and confirm whether a disable is available for your car.

Upload your file