U0112
Lost Communication With Battery Energy Control Module BU0112 is a generic OBD-II network diagnostic trouble code: Lost Communication With Battery Energy Control Module B. It is logged by the engine control unit when the network monitor detects that a specific fault threshold has been exceeded — typically resulting in the malfunction-indicator lamp (MIL / check-engine light) being illuminated.
Detailed reference content for U0112 is being prepared. What you see above — the code's group, system, and the software disable option below — is accurate and complete; the long-form explainer, common causes, symptoms, and diagnostic steps will appear here once they have been reviewed.
Vehicles where we've handled U0112
Platforms in our catalogue with confirmed U0112 coverage.
Related network codes
Disabling U0112 in software
RaceTune can permanently disable U0112 — and any other OBD-II diagnostic trouble code — on every ECU family we support. The monitor is disabled inside the ECU itself, so the fault stops being logged: the warning light stays off and the engine never enters limp mode for this code. The change is tied to your exact software version.
ECU families we can disable U0112 on
We hold the DaVinci A2L disable definitions for these families, so the exact U0112 path and mask addresses are mapped. verified marks a confirmed disable definition. We support many more — upload your file and our identifier will match it automatically.
- Bosch MD1CP001 verified
Software modifications affect emissions compliance and are not road-legal in many jurisdictions. RaceTune service files are intended for motorsport, off-road, and export use.
Got U0112 in your scan?
Upload your ECU file — we'll identify the exact software version and confirm whether a disable is available for your car.
Upload your file