U0110
Lost Communication With Drive Motor Control ModuleU0110 is a generic OBD-II network diagnostic trouble code: Lost Communication With Drive Motor Control Module. It is logged by the engine control unit when the network monitor detects that a specific fault threshold has been exceeded — typically resulting in the malfunction-indicator lamp (MIL / check-engine light) being illuminated.
Detailed reference content for U0110 is being prepared. What you see above — the code's group, system, and the software disable option below — is accurate and complete; the long-form explainer, common causes, symptoms, and diagnostic steps will appear here once they have been reviewed.
Vehicles where we've handled U0110
Platforms in our catalogue with confirmed U0110 coverage.
Related network codes
Disabling U0110 in software
RaceTune can permanently disable U0110 — and any other OBD-II diagnostic trouble code — on every ECU family we support. The monitor is disabled inside the ECU itself, so the fault stops being logged: the warning light stays off and the engine never enters limp mode for this code. The change is tied to your exact software version.
ECU families we can disable U0110 on
We hold the DaVinci A2L disable definitions for these families, so the exact U0110 path and mask addresses are mapped. verified marks a confirmed disable definition. We support many more — upload your file and our identifier will match it automatically.
- Bosch MD1CP001 verified
- Bosch MD1CP004 verified
Software modifications affect emissions compliance and are not road-legal in many jurisdictions. RaceTune service files are intended for motorsport, off-road, and export use.
Got U0110 in your scan?
Upload your ECU file — we'll identify the exact software version and confirm whether a disable is available for your car.
Upload your file