P2626

Sensor Pumping Current Trim Circuit/Open Bank 1 Sensor 1

P2626 is a generic OBD-II powertrain diagnostic trouble code: Sensor Pumping Current Trim Circuit/Open Bank 1 Sensor 1. It is logged by the engine control unit when the powertrain monitor detects that a specific fault threshold has been exceeded — typically resulting in the malfunction-indicator lamp (MIL / check-engine light) being illuminated.

Code
P2626
Group
Powertrain
System
Powertrain
Severity
Warning (MIL on)
Need P2626 disabled?
RaceTune permanently disables any OBD-II trouble code on supported ECUs — for motorsport, off-road, and export use.
→

Detailed reference content for P2626 is being prepared. What you see above — the code's group, system, and the software disable option below — is accurate and complete; the long-form explainer, common causes, symptoms, and diagnostic steps will appear here once they have been reviewed.

Related powertrain codes

Disabling P2626 in software

RaceTune can permanently disable P2626 — and any other OBD-II diagnostic trouble code — on every ECU family we support. The monitor is disabled inside the ECU itself, so the fault stops being logged: the warning light stays off and the engine never enters limp mode for this code. The change is tied to your exact software version.

Permanent
The monitor is disabled in the ECU itself — not just cleared. It cannot return.
Tailored to your file
Each patch is matched to your specific software version — never a one-size-fits-all file.
Reversible
The original file is always preserved. Reflash the stock to return the ECU to factory state.

Software modifications affect emissions compliance and are not road-legal in many jurisdictions. RaceTune service files are intended for motorsport, off-road, and export use.

Got P2626 in your scan?

Upload your ECU file — we'll identify the exact software version and confirm whether a disable is available for your car.

Upload your file