P07B3

Transmission Park Position Sensor/Switch A Circuit Low

P07B3 is a generic OBD-II powertrain diagnostic trouble code: Transmission Park Position Sensor/Switch A Circuit Low. It is logged by the engine control unit when the trans monitor detects that a specific fault threshold has been exceeded — typically resulting in the malfunction-indicator lamp (MIL / check-engine light) being illuminated.

Code

P07B3

Group

Powertrain

System

Trans

Severity

—

Need P07B3 disabled?

RaceTune permanently disables any OBD-II trouble code on supported ECUs — for motorsport, off-road, and export use.

→

Detailed reference content for P07B3 is being prepared. What you see above — the code's group, system, and the software disable option below — is accurate and complete; the long-form explainer, common causes, symptoms, and diagnostic steps will appear here once they have been reviewed.

Related powertrain codes

Disabling P07B3 in software

RaceTune can permanently disable P07B3 — and any other OBD-II diagnostic trouble code — on every ECU family we support. The monitor is disabled inside the ECU itself, so the fault stops being logged: the warning light stays off and the engine never enters limp mode for this code. The change is tied to your exact software version.

Permanent

The monitor is disabled in the ECU itself — not just cleared. It cannot return.

Tailored to your file

Each patch is matched to your specific software version — never a one-size-fits-all file.

Reversible

The original file is always preserved. Reflash the stock to return the ECU to factory state.

Software modifications affect emissions compliance and are not road-legal in many jurisdictions. RaceTune service files are intended for motorsport, off-road, and export use.

Got P07B3 in your scan?

Upload your ECU file — we'll identify the exact software version and confirm whether a disable is available for your car.

Upload your file