P0672
Cylinder 2 Glow Plug CircuitP0672 is a generic OBD-II powertrain diagnostic trouble code: Cylinder 2 Glow Plug Circuit. It is logged by the engine control unit when the glow monitor detects that a specific fault threshold has been exceeded — typically resulting in the malfunction-indicator lamp (MIL / check-engine light) being illuminated.
Detailed reference content for P0672 is being prepared. What you see above — the code's group, system, and the software disable option below — is accurate and complete; the long-form explainer, common causes, symptoms, and diagnostic steps will appear here once they have been reviewed.
Vehicles where we've handled P0672
Platforms in our catalogue with confirmed P0672 coverage.
Related powertrain codes
Disabling P0672 in software
RaceTune can permanently disable P0672 — and any other OBD-II diagnostic trouble code — on every ECU family we support. The monitor is disabled inside the ECU itself, so the fault stops being logged: the warning light stays off and the engine never enters limp mode for this code. The change is tied to your exact software version.
ECU families we can disable P0672 on
We hold the DaVinci A2L disable definitions for these families, so the exact P0672 path and mask addresses are mapped. verified marks a confirmed disable definition. We support many more — upload your file and our identifier will match it automatically.
- Bosch EDC17C50 verified
- Bosch EDC17C56 verified
- Bosch EDC17C60 verified
- Bosch EDC17C66 verified
- Bosch EDC17C74 verified
- Bosch EDC17CP44 verified
- Bosch EDC17CP57 verified
- Bosch MD1CP002 verified
- Bosch MD1CP004 verified
- Bosch MD1CS001 verified
Software modifications affect emissions compliance and are not road-legal in many jurisdictions. RaceTune service files are intended for motorsport, off-road, and export use.
Got P0672 in your scan?
Upload your ECU file — we'll identify the exact software version and confirm whether a disable is available for your car.
Upload your file