P054C
Cold Start B Camshaft Position Timing Over-Advanced Bank 2P054C is a generic OBD-II powertrain diagnostic trouble code: Cold Start B Camshaft Position Timing Over-Advanced Bank 2. It is logged by the engine control unit when the ckp/cmp monitor detects that a specific fault threshold has been exceeded — typically resulting in the malfunction-indicator lamp (MIL / check-engine light) being illuminated.
Detailed reference content for P054C is being prepared. What you see above — the code's group, system, and the software disable option below — is accurate and complete; the long-form explainer, common causes, symptoms, and diagnostic steps will appear here once they have been reviewed.
Related powertrain codes
- P000A — A Camshaft Position Slow Response Bank 1
- P000B — B Camshaft Position Slow Response Bank 1
- P000C — A Camshaft Position Slow Response Bank 2
- P000D — B Camshaft Position Slow Response Bank 2
- P0010 — A Camshaft Position Actuator Circuit (Bank 1)
- P0011 — A Camshaft Position - Timing Over-Advanced or System Performance (Bank 1)
Disabling P054C in software
RaceTune can permanently disable P054C — and any other OBD-II diagnostic trouble code — on every ECU family we support. The monitor is disabled inside the ECU itself, so the fault stops being logged: the warning light stays off and the engine never enters limp mode for this code. The change is tied to your exact software version.
Software modifications affect emissions compliance and are not road-legal in many jurisdictions. RaceTune service files are intended for motorsport, off-road, and export use.
Got P054C in your scan?
Upload your ECU file — we'll identify the exact software version and confirm whether a disable is available for your car.
Upload your file