P013E
O2 Sensor Delayed Response - Rich to Lean (Bank 1 Sensor 2)P013E is a generic OBD-II powertrain diagnostic trouble code: O2 Sensor Delayed Response - Rich to Lean (Bank 1 Sensor 2). It is logged by the engine control unit when the o2/lambda monitor detects that a specific fault threshold has been exceeded — typically resulting in the malfunction-indicator lamp (MIL / check-engine light) being illuminated.
Detailed reference content for P013E is being prepared. What you see above — the code's group, system, and the software disable option below — is accurate and complete; the long-form explainer, common causes, symptoms, and diagnostic steps will appear here once they have been reviewed.
Related powertrain codes
- P0040 — Upstream Oxygen Sensors Swapped From Bank To Bank
- P0041 — Downstream Oxygen Sensors Swapped From Bank To Bank
- P0130 — O2 Sensor Circuit Malfunction (Bank 1 Sensor 1)
- P0131 — O2 Sensor Circuit Low Voltage (Bank 1 Sensor I)
- P0132 — O2 Sensor Circuit High Voltage (Bank 1 Sensor 1)
- P0133 — O2 Sensor Circuit Slow Response (Bank 1 Sensor 1)
Disabling P013E in software
RaceTune can permanently disable P013E — and any other OBD-II diagnostic trouble code — on every ECU family we support. The monitor is disabled inside the ECU itself, so the fault stops being logged: the warning light stays off and the engine never enters limp mode for this code. The change is tied to your exact software version.
Software modifications affect emissions compliance and are not road-legal in many jurisdictions. RaceTune service files are intended for motorsport, off-road, and export use.
Got P013E in your scan?
Upload your ECU file — we'll identify the exact software version and confirm whether a disable is available for your car.
Upload your file