C0625

Left Rear Position Sensor Malfunction

C0625 is a generic OBD-II chassis diagnostic trouble code: Left Rear Position Sensor Malfunction. It is logged by the engine control unit when the chassis monitor detects that a specific fault threshold has been exceeded — typically resulting in the malfunction-indicator lamp (MIL / check-engine light) being illuminated.

Code
C0625
Group
Chassis
System
Chassis
Severity
—
Need C0625 disabled?
RaceTune permanently disables any OBD-II trouble code on supported ECUs — for motorsport, off-road, and export use.
→

Detailed reference content for C0625 is being prepared. What you see above — the code's group, system, and the software disable option below — is accurate and complete; the long-form explainer, common causes, symptoms, and diagnostic steps will appear here once they have been reviewed.

Related chassis codes

Disabling C0625 in software

RaceTune can permanently disable C0625 — and any other OBD-II diagnostic trouble code — on every ECU family we support. The monitor is disabled inside the ECU itself, so the fault stops being logged: the warning light stays off and the engine never enters limp mode for this code. The change is tied to your exact software version.

Permanent
The monitor is disabled in the ECU itself — not just cleared. It cannot return.
Tailored to your file
Each patch is matched to your specific software version — never a one-size-fits-all file.
Reversible
The original file is always preserved. Reflash the stock to return the ECU to factory state.

Software modifications affect emissions compliance and are not road-legal in many jurisdictions. RaceTune service files are intended for motorsport, off-road, and export use.

Got C0625 in your scan?

Upload your ECU file — we'll identify the exact software version and confirm whether a disable is available for your car.

Upload your file