C0559
EEPROM Checksum ErrorC0559 is a generic OBD-II chassis diagnostic trouble code: EEPROM Checksum Error. It is logged by the engine control unit when the chassis monitor detects that a specific fault threshold has been exceeded — typically resulting in the malfunction-indicator lamp (MIL / check-engine light) being illuminated.
Detailed reference content for C0559 is being prepared. What you see above — the code's group, system, and the software disable option below — is accurate and complete; the long-form explainer, common causes, symptoms, and diagnostic steps will appear here once they have been reviewed.
Related chassis codes
- C0503 — Steering Assist Control Solenoid Return Circuit Low
- C0504 — Steering Assist Control Solenoid Return Circuit High
- C0550 — ECU Malfunction - internal write / checksum malfunction
- C0561 — System Disabled Information Stored (Traction Control)
- C0563 — Calibration ROM Checksum Error
- C0577 — Left Front Solenoid Circuit Low
Disabling C0559 in software
RaceTune can permanently disable C0559 — and any other OBD-II diagnostic trouble code — on every ECU family we support. The monitor is disabled inside the ECU itself, so the fault stops being logged: the warning light stays off and the engine never enters limp mode for this code. The change is tied to your exact software version.
Software modifications affect emissions compliance and are not road-legal in many jurisdictions. RaceTune service files are intended for motorsport, off-road, and export use.
Got C0559 in your scan?
Upload your ECU file — we'll identify the exact software version and confirm whether a disable is available for your car.
Upload your file